SERVICES GROUPS  
 

DRILLING RIG R 500

The drilling rig R 500 is designed to execute the work over jobs taking place in the wells and the following operations concerned:
Running and pulling of the tubing, pumps and sucker rods

  • Bailing and cleaning the bore holes
  • Drilling out cement plugs and if needed, recompilation of wells
  • Other jobs associated with the exploitation, plugging back and abandonment of wells within the hoisting capacity range 500kN.

TECHNICAL DATA

Telescopic mast raised and extended hydraulically
- Overall height 27200mm
- Maximum hoisting capacity 500kN
- Wire line 4x3
Drum pulley block bailer
- Revolutions (1/min.) 36,6:318 66:572
- Wire line speed (m/s) 1,06:9,22 1,33:11,5
- Wire line pull (T) 9,27:1,07 7,39:0,85
- Wire line diameter (mm) 22 14
Chassis
- Drive system 8x6
- Caterpillar engine 3406C
- Horsepower 325kM (2000rpm)
- Allison transmission
Substructure
- Height 4000mm
- Working area 4000x4400mm
- Clearance under beam ~3000mm
Pulley block hook
- Hook speed 0,18:1,53m/s
- Hoisting capacity 500kN
Rotary table
- Revolutions 45–210 1/min.
- Torque 1300 – 365kN
Auxiliary equipmentHydraulic winch with hoisting capacity up to 10kN
Hydraulic device for unscrewing of the drill pipe string
Control and measuring equipment by Martin–Decker
Transportation data:
- Width 3000mm
- Height 4000mm
- Length 15000mm
- Weight 40000kg

 

 
 
 
 
       
© 2008 PT ILHAM TREDA INDUSTRI designed by OVOSYS